|
Posted by Duane on January 30, 2003 at 22:10:53: In Reply to: Posted by on January 30, 2003 at 10:59:57: : Duane: : If I understand your comments you are short a few parts. There are 5 rods (in front of the bows) creating the 1/2 cab arch. And 3 bows comprising the arch.. : You are missing: : Center spacer rod (going from windshield center to the horizontal bow) Actually on the 2A this is basically a tube 5/8" I believe (with crimped and bent ends). : Horizontal bow (goes on the top of the bow arch) This genntly curved bow is 7/8 outside diameter and has a slight arch. : You should have two 1" curved bows with dog leg. These are the vertical bows (one on each side. They both have a hole in them and on the other side an L shaped bracket welded to the opposite side. this bracket faces front. : the most difficult to replace items are the two brackets which attach to the windhield verticals and which function as the the hinge into which the door top is inserted. : sdI can't give you exact measurements as the 2A is a little different than the 3A, at least in front of the bow arch. : these bows and rods are very expensive as repros from Beachwood. count yourself lucky if you want an original style soft top. : Bart Hey Bart,
|