Home

The CJ2A Page Message Board


(Click RELOAD after posting to see your message.) 

NOTE: I am cleaning out the Message Board, and am creating a new page called Questions and Answers that contains information gleaned from this forum.

Questions and Answers | Return to The CJ2A Home Page
Re: exhaust routing

[ Follow Ups ] [ Post Followup ] [ ]

Posted by Sam on November 13, 2002 at 07:50:38:

In Reply to: Posted by on November 12, 2002 at 12:21:52:

: Does the exhaust pipe (manifold to connector pipe) route between the engine and bell crank connector link, or between the bell crank link and the frame? When I pulled the engine, it was between engine and link. With new engine/tranny/t-case mounts and a rebuilt steering box, there seems to be no clearance there, with plenty apparent clearance between the frame rail and the link. Thanks

The pipe goes between engine and link, have fun, the repro pipes just are not bent right. Went through the same problem with the link dragging on the pipe, finally had to bend it and even give it a few smacks with a hammer to get enough clearance. You may even find that the center pipe rubs up against the clutch/brake pivot.


Follow Ups



Post Followup

Name:
E-Mail:

Subject:

Message:

Optional Link URL:
Link Title:
Optional Image URL:


[ Follow Ups ] [ Post Followup ] [ ]